AX1800开源固件

eggy

萝卜大侠 发表于 2022-3-30 09:20
驱动是ath11k，无线性能基本没有差别

好的，谢谢管理

mvp114

萝卜大侠 发表于 2022-3-18 21:11
看编译选项是支持的呢，不过我没有设备，不好试

在wlan-ap/openwrt目录下执行make menuconfig图形界面后，没看到IPQ807X的选项呢

萝卜大侠

mvp114 发表于 2022-4-6 16:55
在wlan-ap/openwrt目录下执行make menuconfig图形界面后，没看到IPQ807X的选项呢

你先按AX1800的步骤生产配置，然后打开图形界面，在subtarget那里

jxph1123

能否像L大弄或者openwrt官方那样简单傻瓜点，编译感觉好复杂

萝卜大侠

jxph1123 发表于 2022-4-11 17:06
能否像L大弄或者openwrt官方那样简单傻瓜点，编译感觉好复杂

其实这个应该更简单，虽然配置复杂了一些，但是可以避免很多环境依赖的问题

jxph1123

萝卜大侠 发表于 2022-4-12 09:34
其实这个应该更简单，虽然配置复杂了一些，但是可以避免很多环境依赖的问题 ...

比如天灵的，L大的，都比较简单啊。。而且也很少出现依赖问题。都是根据型号自动选进去。然后就自己选个APP，直接编译，很简单啊。

萝卜大侠

jxph1123 发表于 2022-4-12 15:31
比如天灵的，L大的，都比较简单啊。。而且也很少出现依赖问题。都是根据型号自动选进去。然后就自己选个A ...

我去学习一下哈

jxph1123

萝卜大侠 发表于 2022-4-12 16:18
我去学习一下哈

对你们这些高手，soeasy，他们是在官方的基础上改进，适合我们这些小白刷刷。。。你们的太高深了，小白编译不出来

萝卜大侠

jxph1123 发表于 2022-4-12 16:22
对你们这些高手，soeasy，他们是在官方的基础上改进，适合我们这些小白刷刷。。。你们的太高深了，小白编 ...

让大家看笑话了，我去体验一下然后改进下编译流程

jxph1123

大侠，我编译官方源码有下面几个问题：
1.警告，这个有没有关系？
WARNING: Makefile 'package/feeds/packages/qemu/Makefile' has a dependency on 'libfdt', which does not exist
WARNING: Makefile 'package/feeds/packages/qemu/Makefile' has a dependency on 'libfdt', which does not exist
tmp/.config-package.in:17222:error: recursive dependency detected!
tmp/.config-package.in:17222:        symbol PACKAGE_kmod-sched-cake is selected by PACKAGE_kmod-sched-cake
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"


2.haproxy死活编译不过，请指教，谢谢

make[4]: Entering directory '/home/etek/gl-infra-builder/wlan-ap/openwrt/build_dir/target-arm_cortex-a7_musl_eabi/haproxy-ssl/haproxy-2.4.14'
  CC      src/ev_poll.o
arm-openwrt-linux-muslgnueabi-gcc: error: unrecognized command line option '-Wshift-negative-value'
arm-openwrt-linux-muslgnueabi-gcc: error: unrecognized command line option '-Wshift-overflow=2'
arm-openwrt-linux-muslgnueabi-gcc: error: unrecognized command line option '-Wduplicated-cond'
arm-openwrt-linux-muslgnueabi-gcc: error: unrecognized command line option '-Wnull-dereference'
Makefile:955: recipe for target 'src/ev_poll.o' failed
make[4]: *** [src/ev_poll.o] Error 1
make[4]: Leaving directory '/home/etek/gl-infra-builder/wlan-ap/openwrt/build_dir/target-arm_cortex-a7_musl_eabi/haproxy-ssl/haproxy-2.4.14'
Makefile:144: recipe for target '/home/etek/gl-infra-builder/wlan-ap/openwrt/build_dir/target-arm_cortex-a7_musl_eabi/haproxy-ssl/haproxy-2.4.14/.built' failed
make[3]: *** [/home/etek/gl-infra-builder/wlan-ap/openwrt/build_dir/target-arm_cortex-a7_musl_eabi/haproxy-ssl/haproxy-2.4.14/.built] Error 2
make[3]: Leaving directory '/home/etek/gl-infra-builder/wlan-ap/openwrt/feeds/packages/net/haproxy'
time: package/feeds/packages/haproxy/ssl/compile#0.61#0.71#1.69
    ERROR: package/feeds/packages/haproxy failed to build (build variant: ssl).
package/Makefile:112: recipe for target 'package/feeds/packages/haproxy/compile' failed
make[2]: *** [package/feeds/packages/haproxy/compile] Error 1
make[2]: Leaving directory '/home/etek/gl-infra-builder/wlan-ap/openwrt'
package/Makefile:108: recipe for target '/home/etek/gl-infra-builder/wlan-ap/openwrt/staging_dir/target-arm_cortex-a7_musl_eabi/stamp/.package_compile' failed
make[1]: *** [/home/etek/gl-infra-builder/wlan-ap/openwrt/staging_dir/target-arm_cortex-a7_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/etek/gl-infra-builder/wlan-ap/openwrt'
/home/etek/gl-infra-builder/wlan-ap/openwrt/include/toplevel.mk:228: recipe for target 'world' failed
make: *** [world] Error 2

感谢大侠~~