|
如果不进入刷机,直接开机的话Serial终端似乎是这样……
- U-Boot 2022.07-rc3 (Sep 12 2022 - 19:58:08 -0700)
- CPU: MediaTek MT7981
- Model: mt7981-rfb
- DRAM: 1 GiB
- Core: 43 devices, 20 uclasses, devicetree: embed
- MMC: mmc@11230000: 0
- Loading Environment from MMC... unable to select a mode : -110
- mmc_init: -524, time 73
- *** Warning - No block device, using default environment
- In: serial@11002000
- Out: serial@11002000
- Err: serial@11002000
- Net:
- Warning: ethernet@15100000 (eth0) using random MAC address - fa:2d:81:67:69:ff
- eth0: ethernet@15100000
- gpio: pin 12 (gpio 12) value is 0
- Enter "gl" to stop autoboot in 2 seconds
- *** Upgrading Firmware ***
- ethernet@15100000 Waiting for PHY auto negotiation to complete... done
- Using ethernet@15100000 device
- TFTP from server 192.168.1.2; our IP address is 192.168.1.1
- Filename 'openwrt-gl-mt2500.bin'.
- Load address: 0x46000000
- Loading: T T T
- Retry count exceeded; starting again
- *** TFTP client failure: -64 ***
- *** Operation Aborted! ***
- unable to select a mode : -110
- mmc_init: -524, time 73
- *** Failed to initialize MMC device 0! ***
- unable to select a mode : -110
- mmc_init: -524, time 72
- *** Failed to initialize MMC device 0! ***
- MT7981>
复制代码
这是不是说明上一次的系统升级根本没有成功,于是卡在这儿了啊……( |
|