AXT1800 6.6内核固件尝鲜

不望月的狼人

macfee 发表于 2024-3-7 14:35
大佬那个仓库能不能适配个op 21.02最终版的？ 几乎所有科学软件在fw4上相比fw3，性能大幅下降，或者随机出 ...

建议你直接使用lean的lede仓库

jxph1123

不望月的狼人 发表于 2024-3-19 16:26
https://github.com/JiaY-shi/openwrt/tree/ipq60xx-devel_6.6

已开源，自取

make[3]: Entering directory '/home/etek/openwrt-JiaY_nss_6.6/feeds/nss_packages/qca/qca-nss-drv'
rm -f /home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403/.built
touch /home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403/.built_check
make -C "/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/linux-6.6.22" NSS_DRV_C2C_ENABLE=n NSS_DRV_DMA_ENABLE=n NSS_DRV_DTLS_ENABLE=n NSS_DRV_EDMA_ENABLE=n NSS_DRV_GRE_REDIR_ENABLE=n NSS_DRV_GRE_TUNNEL_ENABLE=n NSS_DRV_IPSEC_ENABLE=n NSS_DRV_IPV4_REASM_ENABLE=n NSS_DRV_IPV6_REASM_ENABLE=n NSS_DRV_L2TP_ENABLE=n NSS_DRV_MAPT_ENABLE=n NSS_DRV_MATCH_ENABLE=n NSS_DRV_MIRROR_ENABLE=n NSS_DRV_OAM_ENABLE=n NSS_DRV_PORTID_ENABLE=n NSS_DRV_QRFS_ENABLE=n NSS_DRV_QVPN_ENABLE=n NSS_DRV_OVPN_ENABLE=n NSS_DRV_RMNET_ENABLE=n NSS_DRV_SJACK_ENABLE=n NSS_DRV_TLS_ENABLE=n NSS_DRV_TRUSTSEC_ENABLE=n NSS_DRV_TRUSTSEC_RX_ENABLE=n NSS_DRV_TSTAMP_ENABLE=n NSS_DRV_WIFI_EXT_VDEV_ENABLE=n NSS_DRV_WIFI_MESH_ENABLE=n CROSS_COMPILE="aarch64-openwrt-linux-musl-" ARCH="arm64" M="/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403" EXTRA_CFLAGS="-I/home/etek/openwrt-JiaY_nss_6.6/staging_dir/target-aarch64_cortex-a53_musl/usr/include/qca-nss-gmac -I/home/etek/openwrt-JiaY_nss_6.6/staging_dir/target-aarch64_cortex-a53_musl/usr/include/qca-nss-dp -I/home/etek/openwrt-JiaY_nss_6.6/staging_dir/target-aarch64_cortex-a53_musl/usr/include/qca-ssdk -Wno-unused-variable -DNSS_MEM_PROFILE_MEDIUM" SoC="ipq60xx_64" KCFLAGS="-fmacro-prefix-map=/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl=target-aarch64_cortex-a53_musl -fno-caller-saves " HOSTCFLAGS="-O2 -I/home/etek/openwrt-JiaY_nss_6.6/staging_dir/host/include -I/home/etek/openwrt-JiaY_nss_6.6/staging_dir/hostpkg/include -I/home/etek/openwrt-JiaY_nss_6.6/staging_dir/target-aarch64_cortex-a53_musl/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes" CROSS_COMPILE="aarch64-openwrt-linux-musl-" ARCH="arm64" KBUILD_HAVE_NLS=no KBUILD_BUILD_USER="" KBUILD_BUILD_HOST="" KBUILD_BUILD_TIMESTAMP="Tue Mar 19 11:59:37 2024" KBUILD_BUILD_VERSION="0" KBUILD_HOSTLDFLAGS="-L/home/etek/openwrt-JiaY_nss_6.6/staging_dir/host/lib" CONFIG_SHELL="bash" V=''  cmd_syscalls= KBUILD_EXTRA_SYMBOLS="/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/symvers/gpio-button-hotplug.symvers /home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/symvers/qca-mcs.symvers /home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/symvers/qca-nss-dp.symvers /home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/symvers/qca-ssdk.symvers" CC="aarch64-openwrt-linux-musl-gcc" KERNELRELEASE=6.6.22  modules
make[4]: Entering directory '/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/linux-6.6.22'
  CC [M]  /home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403/nss_core.o
/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403/nss_core.c:69:2: error: #error "Check skb recycle code in this file to match Linux version"
   69 | #error "Check skb recycle code in this file to match Linux version"
      |  ^~~~~
scripts/Makefile.build:243: recipe for target '/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403/nss_core.o' failed
make[6]: *** [/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403/nss_core.o] Error 1
/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/linux-6.6.22/Makefile:1913: recipe for target '/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403' failed
make[5]: *** [/home/etek/openwrt-JiaY_nss_6.6/build_dir/target-aarch64_cortex-a53_musl/linux-qualcommax_ipq60xx/qca-nss-drv-2023-08-06-1ab18403] Error 2
Makefile:234: recipe for target '__sub-make' failed
make[4]: *** [__sub-make] Error 2




报错，有人碰到吗

不望月的狼人

jxph1123 发表于 2024-3-19 22:57
make[3]: Entering directory '/home/etek/openwrt-JiaY_nss_6.6/feeds/nss_packages/qca/qca-nss-drv'
rm ...

看起来没有使用最新的nss-package

jxph1123

不望月的狼人 发表于 2024-3-20 09:39
看起来没有使用最新的nss-package

可以了，没注意有个K6.6

jxph1123

不望月的狼人 发表于 2024-3-19 16:26
这个是给op官提PR的分支

ipq-wifi: update to version 2024-03-19
2d698ec ipq60xx: add glinet gl-axt1800 BDF
36d4be9 ipq60xx: add glinet gl-ax1800 BDF
bf80516 ipq60xx: add yuncore fap650 BDF

Signed-off-by: Shi Jiayang <shi05275@163.com>


大神，这个gl-inet分支有wifi了吗

不望月的狼人

jxph1123 发表于 2024-3-21 10:46
ipq-wifi: update to version 2024-03-19
2d698ec ipq60xx: add glinet gl-axt1800 BDF
36d4be9 ipq60xx: ...

有的，这个是给op官提交的PR分支，会保证基本使用的

jxph1123

不望月的狼人 发表于 2024-3-21 11:01
有的，这个是给op官提交的PR分支，会保证基本使用的

好的，我再试试这个版本，前几天编译的没有wifi

suhaha

感谢楼主！用上了，十分完美啊。太棒了，多谢多谢

fisheart

更新软件列表时，提示“无法执行 opkg update 命令：SyntaxError: Unexpected end of JSON input” 求解

inser777

固件尝鲜 感谢大神