(忽略)axt1800官方固件第三方插件源，还有点小问题

junling · 发表于 2024-1-12 17:30:18

本帖最后由 junling 于 2024-1-13 00:22 编辑

junling · 发表于 2024-1-12 17:30:54

本帖最后由 junling 于 2024-1-12 17:36 编辑

这些源应该够了吧，还有不兼容但强行安装会有问题吗？src/gz 6 https://dl.openwrt.ai/23.05/arm_cortex-a7/luci/
src/gz 5 https://dl.openwrt.ai/23.05/arm_cortex-a7/routing/
src/gz 4 https://dl.openwrt.ai/23.05/arm_cortex-a7/base/
src/gz 3 https://dl.openwrt.ai/23.05/arm_cortex-a7/packages/
src/gz 2-2 https://dl.openwrt.ai/23.05/arm_cortex-a7/kiddin9/old/
src/gz 2 https://dl.openwrt.ai/23.05/arm_cortex-a7/kiddin9/
src/gz 1 https://dl.openwrt.ai/23.05/targets/ipq807x/ipq60xx/4.4.60/
src/gz istore_compat https://istore.linkease.com/repo/all/compat/

junling · 发表于 2024-1-12 21:51:52

本帖最后由 junling 于 2024-1-13 00:26 编辑

没用，废了

安装后出现
/usr/lib/lua/luci/dispatcher.lua:1374: module 'luci.cbi' not found:
      no field package.preload['luci.cbi']
      no file './luci/cbi.lua'
      no file '/usr/share/lua/luci/cbi.lua'
      no file '/usr/share/lua/luci/cbi/init.lua'
      no file '/usr/lib/lua/luci/cbi.lua'
      no file '/usr/lib/lua/luci/cbi/init.lua'
      no file './luci/cbi.so'
      no file '/usr/lib/lua/luci/cbi.so'
      no file '/usr/lib/lua/loadall.so'
      no file './luci.so'
      no file '/usr/lib/lua/luci.so'
      no file '/usr/lib/lua/loadall.so'
stack traceback:
      [C]: in function 'require'
      /usr/lib/lua/luci/dispatcher.lua:1374: in function '_cbi'
      /usr/lib/lua/luci/dispatcher.lua:1051: in function 'dispatch'
      /usr/lib/lua/luci/dispatcher.lua:1027: in function 'dispatch'
      /usr/lib/lua/luci/dispatcher.lua:479: in function </usr/lib/lua/luci/dispatcher.lua:478>

不知道怎么搞回来

一顿操作又变成了
An error occurred while reading CGI reply (no response received)

zhangfen137 · 发表于 2024-1-13 01:23:39

本帖最后由 zhangfen137 于 2024-1-13 01:36 编辑

源配置错了，看下这两固件吧，可能有你想要的
uboot 刷机用：
https://dl.openwrt.ai/releases/targets/qualcommax/ipq60xx/openwrt-11.19.2023-qualcommax-ipq60xx-glinet_gl-axt1800-squashfs-nand-factory.ubi
openwrt 升级用：
https://dl.openwrt.ai/releases/targets/qualcommax/ipq60xx/openwrt-11.19.2023-qualcommax-ipq60xx-glinet_gl-axt1800-squashfs-nand-sysupgrade.bin

junling · 发表于 2024-1-13 20:11:12

本帖最后由 junling 于 2024-1-13 20:15 编辑

zhangfen137 发表于 2024-1-13 01:23
源配置错了，看下这两固件吧，可能有你想要的
uboot 刷机用：
https://dl.openwrt.ai/releases/targets/qua ...

本来想在官方4.4.6固件中加第三方源添加插件，结果失败了，下载猫后变乱码，搞不回来
又老老实实的刷回了openwrt.ai中的固件

akhzz · 发表于 2024-1-14 20:31:05

版本错了，官方系统是21.02-SNAPSHOT版本的，你那个源是23.05的

akhzz · 发表于 2024-1-14 20:35:04

AX1800是21版本的，AXT1800应该也是21版本的，可以用这些
中科大镜像源：
src/gz openwrt_core https://mirrors.ustc.edu.cn/open ... chip/armv8/packages
src/gz openwrt_base https://mirrors.ustc.edu.cn/open ... arch64_generic/base
src/gz openwrt_luci https://mirrors.ustc.edu.cn/open ... arch64_generic/luci
src/gz openwrt_packages https://mirrors.ustc.edu.cn/open ... 64_generic/packages
src/gz openwrt_routing https://mirrors.ustc.edu.cn/open ... h64_generic/routing
src/gz openwrt_telephony https://mirrors.ustc.edu.cn/open ... 4_generic/telephony

清华镜像源：
src/gz openwrt_core https://mirrors.tuna.tsinghua.ed ... chip/armv8/packages
src/gz openwrt_base https://mirrors.tuna.tsinghua.ed ... arch64_generic/base
src/gz openwrt_luci https://mirrors.tuna.tsinghua.ed ... arch64_generic/luci
src/gz openwrt_packages https://mirrors.tuna.tsinghua.ed ... 64_generic/packages
src/gz openwrt_routing https://mirrors.tuna.tsinghua.ed ... h64_generic/routing
src/gz openwrt_telephony https://mirrors.tuna.tsinghua.ed ... 4_generic/telephony

OpenWrt官方源：
src/gz openwrt_core https://downloads.openwrt.org/re ... chip/armv8/packages
src/gz openwrt_base https://downloads.openwrt.org/re ... arch64_generic/base
src/gz openwrt_luci https://downloads.openwrt.org/re ... arch64_generic/luci
src/gz openwrt_packages https://downloads.openwrt.org/re ... 64_generic/packages
src/gz openwrt_routing https://downloads.openwrt.org/re ... h64_generic/routing
src/gz openwrt_telephony https://downloads.openwrt.org/re ... 4_generic/telephony

junling · 发表于 2024-1-15 01:15:09

本帖最后由 junling 于 2024-1-15 01:18 编辑

akhzz 发表于 2024-1-14 20:35
AX1800是21版本的，AXT1800应该也是21版本的，可以用这些
中科大镜像源：
src/gz openwrt_core https://mir ...

axt1800官方固件不是arm7吗，arm7的插件是不是比arm8少一点

junling · 发表于 2024-1-15 01:19:34

zhangfen137 发表于 2024-1-13 01:23
源配置错了，看下这两固件吧，可能有你想要的
uboot 刷机用：
https://dl.openwrt.ai/releases/targets/qua ...

https://github.com/kiddin9/openwrt-packages中写“适用于openwrt 21.02 及以上的分支”，我还以为也适合呢

akhzz · 发表于 2024-1-15 10:58:24

junling 发表于 2024-1-15 01:15
axt1800官方固件不是arm7吗，arm7的插件是不是比arm8少一点

稍微改一下就行，你点链接进去，然后按分类添加就行了
清华：https://mirrors.tuna.tsinghua.ed ... ages/arm_cortex-a7/
中科大：https://mirrors.ustc.edu.cn/open ... ages/arm_cortex-a7/
op官方：https://mirror-01.infra.openwrt. ... ages/arm_cortex-a7/

		自动登录	找回密码
密码			立即注册

[固件资源] (忽略)axt1800官方固件第三方插件源，还有点小问题

本帖子中包含更多资源