AXT1800为什么用着用着容易重启

hehe5487

AXT1800用着用着容易重启，重启时间不定，能通过什么日志查看到为什么会自己重启吗，每天设置了0点自动重启，但是白天偶尔会自己重启显示 闪烁绿灯，一天看到的是一两次这样。每次打开WIFI，然后第一次打开微信 更新数据都很慢，连家里其它路由器放出的WIFI就不会。

f1t0y

不是吧，我觉得很稳定呀，我只是作为旁路由。

Anna

我也在好奇这个问题，内存占量在95%的样子就有可能卡死或重启。（做主路由）

hehe5487

肚大侠 发表于 2023-1-11 09:09
可以看下系统日志，内核日志的异常信息，还有固件版本多少。

4.1.0 的beta3开始一直升到4.1.0稳定版，一直以为最新版本能解决这个问题，就一直在升级，现在升到了4.2.0 beta2，中间特意为了这个问题重置了路由器 安装了4.1.0稳定版，还是一样。
内核日志大多都是这样的，我也看不太明白，得哪天白天有空在家正好碰到重启了，再看看
[   26.247781] device eth1 entered promiscuous mode
[   26.252704] device eth2 entered promiscuous mode
[   26.252804] br-lan: port 2(eth2) entered forwarding state
[   26.256472] br-lan: port 2(eth2) entered forwarding state
[   26.266976] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.404660] nss-dp 3a001000.dp1 eth0: PHY Link up speed: 1000
[   26.404735] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.005407] device wlan0 entered promiscuous mode
[   27.005544] br-lan: port 3(wlan0) entered forwarding state
[   27.009143] br-lan: port 3(wlan0) entered forwarding state
[   27.028040] tertf: br-lan registered, add it
[   27.028328] tertf: br-guest registered, add it
[   27.255683] br-lan: port 2(eth2) entered disabled state
[   27.256071] br-lan: port 3(wlan0) entered disabled state
[   27.929082] device wlan1 entered promiscuous mode
[   27.929185] br-lan: port 4(wlan1) entered forwarding state
[   27.932809] br-lan: port 4(wlan1) entered forwarding state
[   28.244517] br-lan: port 4(wlan1) entered disabled state
[   34.736274] ath11k c000000.wifi: bss color param 0x81000000 set on vdev 0
[   34.736357] br-lan: port 3(wlan0) entered forwarding state
[   34.742080] br-lan: port 3(wlan0) entered forwarding state
[   41.897346] ath11k c000000.wifi: bss color param 0x81000000 set on vdev 1
[   41.898128] br-lan: port 4(wlan1) entered forwarding state
[   41.903163] br-lan: port 4(wlan1) entered forwarding state
[   42.764375] br-lan: port 3(wlan0) entered forwarding state
[   49.924377] br-lan: port 4(wlan1) entered forwarding state
[  422.881549] svc: failed to register nfsdv3 RPC service (errno 110).
[129688.525564] nss-dp 3a001400.dp3 eth2: PHY Link up speed: 1000
[129688.525730] br-lan: port 2(eth2) entered forwarding state
[129688.530338] br-lan: port 2(eth2) entered forwarding state
[129690.535363] nss-dp 3a001400.dp3 eth2: PHY Link is down
[129690.535681] br-lan: port 2(eth2) entered disabled state
[129692.535361] nss-dp 3a001400.dp3 eth2: PHY Link up speed: 1000
[129692.535436] br-lan: port 2(eth2) entered forwarding state
[129692.540138] br-lan: port 2(eth2) entered forwarding state
[129700.555175] br-lan: port 2(eth2) entered forwarding state
[129708.545194] nss-dp 3a001400.dp3 eth2: PHY Link is down
[129708.545514] br-lan: port 2(eth2) entered disabled state
[129710.545220] nss-dp 3a001400.dp3 eth2: PHY Link up speed: 1000
[129710.545301] br-lan: port 2(eth2) entered forwarding state
[129710.550000] br-lan: port 2(eth2) entered forwarding state
[129718.555011] br-lan: port 2(eth2) entered forwarding state

hehe5487

Anna 发表于 2023-1-11 19:29
我也在好奇这个问题，内存占量在95%的样子就有可能卡死或重启。（做主路由） ...

内存我还没注意看看，周末我再研究观察下

hehe5487

f1t0y 发表于 2023-1-11 11:14
不是吧，我觉得很稳定呀，我只是作为旁路由。

我也是旁路由，好像除了刚买来的那个版本比较正常，其他都容易重启！不过刚买来的也没多久就被刷机了，不好确定是哪个固件的问题。

Anna

hehe5487 发表于 2023-1-11 21:39
内存我还没注意看看，周末我再研究观察下

随机性很大，我也没看懂。可能还是有稳定性问题或软件BUG。

hehe5487

有没有大佬 有这方面的排查经验吗 老是重启 有点用的不舒服啊!

sonysz

我的也是无故重启。官方4.1稳定版。