AX1800,AXT1800 5.4版本内核版本固件

1034708419

萝卜大侠 发表于 2022-7-6 16:34
等会试下哈

是不是不能同时client和master啊？我禁用了client就好了

萝卜大侠

1034708419 发表于 2022-7-7 09:22
是不是不能同时client和master啊？我禁用了client就好了

你那个client是不是一直没连上？

1034708419

萝卜大侠 发表于 2022-7-7 09:35
你那个client是不是一直没连上？

是的，便携路由器嘛总是要来回带的。在家里他就连不上配置好的单位wifi喽

dongjun

新固件有什么已知问题吗

萝卜大侠

1034708419 发表于 2022-7-7 10:11
是的，便携路由器嘛总是要来回带的。在家里他就连不上配置好的单位wifi喽 ...

luci配中继是有这样的问题的，我们的界面是专门处理过的

m0eak

5.4内核编译的插件能安装在4.4内核的系统里面?

萝卜大侠

m0eak 发表于 2022-7-19 11:44
5.4内核编译的插件能安装在4.4内核的系统里面?

应该可以

锟斤拷屯烫烫烫

好像刷了这个固件 , 还是会提示升级到3.214吧

torry_pu

刷了5.4固件后，修改内部网络IP后，就只能进luci界面，只能进官方的gl界面了。

特异个体

到./scripts/gen_config.py target_wlan_ap-gl-ax1800-5-4 luci这一步，报错了
bash: ./scripts/gen_config.py: No such file or directory
而前一步的执行没有出现报错：

Applying: mac80211: pending fixes
Applying: hostapd: backport latest HEAD
Applying: hostapd: pending fixes
Applying: hostapd: add wispr bandwidth patch
Applying: hostapd: add multiple_bssid rnr_beacon he_co_locate ema options
Applying: hostapd: move radius into its own function
Applying: hostapd: add acs_exclude_dfs support
Applying: hostapd: always install the cli
Applying: hostapd: add acs_exclude_dfs support for SW ACS
Applying: hostapd: Fix ap+sta channel setup issue
Applying: hostapd: do not set second freq when running ACS
Applying: hostapd: fix phy level max-assoc settings
Applying: netifd: add psk radius
Applying: ath79: add Support for Indio 305AC
Applying: ath79: tl-wpa8630p fixes
Applying: ath79: add support for TP-Link CPE710-v1
Applying: ath79: various fixes
Applying: certificates: add ability to persistently store certificates
Applying: ramips: add tplink ex228 support
Applying: ramips: make wifi work
Applying: mt7621: add linksys ea6350 and ea7200 support
Applying: certificates: add ability to persistently store certificates
Applying: mt7621: add CIG WF808 support
Applying: ramips: add support for actiontec web7200
Applying: ramips: add mtk_bmt support (includes bbt, bmt v2, nmbm)
Applying: ramips: move mt7621_nand driver to files
Applying: ramips: mt7621_nand: reduce log verbosity
Applying: ramips: mt7621_nand: initialize ECC_FDMADDR
Applying: ramips: enable support for mtk_bmt in the nand flash driver
Applying: ramips: skip bbt scan on mt7621
Applying: kernel: mtdsplit: support UBI after FIT images
Applying: update actiontec web7200 support
Applying: ramips: add mt7621_indio_um-305ax
Applying: ramips: disable switch/bridge offload
Applying: Revert "ipq40xx: revert usage of VLAN S-TAG"
Applying: ipq40xx: add ath10k-ct fw.cfg stubs
Applying: ipq4019: add CIG wf610d
Applying: ipq40xx: add tplink ec420 support
Applying: ipq4018: add EdgeCore SPW2AC1200 support
Applying: ipq40xx: add Wallys DR40x9 support
Applying: ipq40xx: add HFCL ION4 support
Applying: ipq40xx: enable napi threading
Applying: ipq40xx: add packet_steering script from 19.07
Applying: certificates: add ability to persistently store certificates
Applying: spwlanpoe
Applying: Revert "ipq40xx: ar40xx: reset port status register"
Applying: ipq40xx: disable dualboot on ecw5211
Applying: ipq40xx: add Support for Indio's UM-325AC AP
Applying: ipq40xx: add support for udaya a5-id2
Applying: ipq40xx: Support for Indio's Outdoor IP67 WiFi5 AP UM-550AC
Applying: ipq40xx: Support for Indio UM-510AC-V3 AP Model, Outdoor WiFi5 AP based on IPQ40XX
Applying: ipq806x: simplify ecw5410 dts
Applying: ipq806x: update to latest HEAD
Applying: ipq806x: add edgecore_ssw2ac2600 support
Applying: Revert "toolchain: gcc: Remove support for GCC 5"
Applying: ipq807x: add qsdk kernel support
Applying: linux/modules: fix some v4.4 dependencies
Applying: ipq807x: add the Qualcomm AX target support
Applying: tools: add realtek image building code
Applying: rtkmipsel: add kernel-version
Applying: kernel-headers: add v3.18->v5.10 support
Applying: toolchain: do not enable mips16 on realtek AP kernel
Applying: rtkmipsel: select gcc-5 as the compiler
Applying: rtkmipsel: kernel module fixes
Applying: dnsmasq: add relay / option82 support
Applying: lldp: add TIP tweaks
Applying: ugps: update to latest HEAD
Applying: Revert "libusb: update to 1.0.24"
Applying: firewall: enable ssh on wan during early boot stage
Applying: netifd: fix compile on older kernels
### Patches done
### Reset done
### Copying files
Coping files from /home/msroot/Desktop/OpenWrt/gl-infra-builder/files-wlan-ap-5.4
### Applying patches
Adding patches from /home/msroot/Desktop/OpenWrt/gl-infra-builder/patches-wlan-ap-5.4
Found 24 patches
Applying: ax1800/axt1800: fit dts for gl.inet
Applying: wifi-ax: fix gen macaddr
Applying: ipq807x: add wireguard support
Applying: ipq807x: change the suffix of nand-factory.bin
Applying: wifi-ax: add kmod-hwmon-core dependent for ath11k
Applying: ipq807x: fix gl-ax1800 switch button high active level
Applying: ipq807x: use append-metadata-gl for gl-ax1800/gl-axt1800
Applying: ipq807x: add modem support for gl.inet
Applying: wireguard: add hotplug support
Applying: axt1800: fix dts for sdhci
Applying: gl-axt1800: fix gl-fan dts
Using index info to reconstruct a base tree...
M        feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-axt1800.dts
Falling back to patching base and 3-way merge...
Auto-merging feeds/ipq807x/ipq807x/files/arch/arm64/boot/dts/qcom/qcom-ipq6018-gl-axt1800.dts
Applying: Revert "base-files: set default password to "openwifi""
Applying: Revert "base-files: ignore sysupgrade that was not ours"
Applying: gen_config: add version info
Applying: gpio-button-hotplug: notify with label
Applying: ipq: factory image uboot web compatibility
Applying: fix bridge isolate
Applying: kernel: fix build fail for bridge
Applying: image: add append-metadata-gl support
Applying: support append glinet private packages
Applying: ipq: add flash script into factory image
Applying: add inet-diag support
Applying: fixed openwrt feeds hash
Applying: update lib version
### Patches done

这里是有什么问题吗？