GL.iNet op-24 on GL-MT6000 + 第三方特殊插件

角色

我们在GL.iNet GL-MT6000安装了OPENWRT 24：v4.8.2-op24后，系统有GL.iNet Admin Panel和OpenWrt v24.10 series。平时在GL.iNet Admin Panel都有，而OpenWrt也有v24.10的系统，在v24.10里可以安装第三方特殊插件。

你以前的版本v4.5.4都可以加入ImmortalWrt[1]，可能中间有些版本有冲突，有把v4.5.4之后又改回去，就有MediaTek SDK版本到现在v4.8.2。而广联就开发另外新线GL.iNet op-24 on GL-MT6000/GL-MT3000都可以用，GL.iNet op-24基于OpenWrt v24.10 series。

有了GL.iNet op-24，就算用大陆版都可以安装适合第三方特殊插件。在这里“安装适合第三方特殊插件”有三方法，一）用dl.openwrt.ai，二）用ImmortalWrt，三）自己去找库，如果找到就可以安装，通常第一或第二种方法为佳。如果不用GL.iNet op-24，而只有OpenWrt一个，也可以“安装适合第三方特殊插件”。

用途	大陆CN版 (大陆使用)	大陆CN版 (香港使用)	香港US版 (大陆使用)	香港US版 (香港使用)
VPN	没有VPN	没有VPN	可以用VPN	可以用VPN
大陆GL.iNet	limited functions	limited functions
香港GL.iNet			full fuctions	full fuctions
大陆/香港GL.iNet op-24	支持OpenWrt	支持OpenWrt	支持OpenWrt	支持OpenWrt
第三方特殊插件	支持	支持	支持	支持

References:
[1] GL-iNet MT6000基于原厂固件安装插件教程

图1：GL.iNet Admin Panel v4.8.2-op24 on GL-MT6000 (大陆版没有VPN，香港版有VPN)

角色

目录：

https://toh.openwrt.org
Master Guide on GL-MT6000

安装GL.iNet Admin Panel v4.x.x-op24 on GL-MT6000

大陆使用OpenWrt
安装PuTTY
OpenWrt repository server不用国外，要用大陆的
要很多插第三方插件要求dnsmasq-full

普通插件
OpenWrt CPU temperature温度安装

一、第三方特殊插件dl.openwrt.ai
GL.iNet OpenWrt加第三方特殊插件用dl.openwrt.ai
安装PassWaxx (xx->ll)
安装HomeProxy
安装SSx-Plus (x->R)
安装OpenClaxx (xx->sh)

二、第三方特殊插件ImmortalWrt
GL.iNet OpenWrt加第三方特殊插件用ImmortalWrt
安装PassWaxx  (xx->ll)
安装HomeProxy
安装OpenClaxx (xx->sh)

三、第三方特殊插件，自己找库
系统重置
GL.iNet OpenWrt (GL-MT6000) opkg configuration
OpenWrt repository server不用国外，要用大陆的
改动/etc/opkg/distfeeds.conf，方便大陆输入基本插件
要很多插第三方插件要求dnsmasq-full
WinSCP
PuTTY
自己安装PassWaxx (xx->ll)

固件
GL.iNet Admin Panel v4.8.2-op24 on GL-MT6000
GL.iNet Admin Panel v4.8.0-op24 on GL-MT6000

角色

安装GL.iNet Admin Panel v4.x.x-op24 on GL-MT6000


安装GL-MT6000 v4.8.2-op24

https://dl.gl-inet.cn

在“GL-MT6000 Flint 2”，“OpenWrt 24”，下载“4.8.2-op24”固件。

图1：IP=192.168.8.1


图2：输入密码二次


图3：可以Wi-Fi SSIDs and passwords


图4：WAN connection selection，normally ethernet


图5：Admin Panel


图6：Advanced Settings， Install Now


图7：Go to LuCI


图8：OpenWrt login wimdow


图9：GL-MT6000 (OpenWrt)


图10：系统


图11：语言与界面


图12：选English, 选BootstrapDark


图13：出来效果


图14：选System，Software


图15：Configure opkg


图16：OPKG Configuraion

角色

安装SSx-Plus (x->R)

opkg update
opkg install luci-app-ssx-plus (x->r)

角色

安装OpenClaxx (xx->sh)
opkg update
opkg install luci-app-openclaxx (ss->sh)

角色

GL.iNet OpenWrt加第三方特殊插件用dl.openwrt.ai

如果要有可以加入外加插件，就在“System”->“Software”，在Configure opkg里，加入下面信息[1]

/etc/opkg/customfeeds.conf

1. src/gz openwrt_kiddin9 https://dl.openwrt.ai/latest/packages/aarch64_cortex-a53/kiddin9

复制代码

当第三方插件下载后，可以还原。

/etc/opkg/customfeeds.conf

1. #src/gz openwrt_kiddin9 https://dl.openwrt.ai/latest/packages/aarch64_cortex-a53/kiddin9

复制代码

感谢：
[1] openwrt原生固件，添加软件源，安装三方插件：https://forum.gl-inet.cn/forum.php?mod=viewthread&tid=5055 zhangfen137

角色

GL.iNet OpenWrt加第三方特殊插件用ImmortalWrt[1]


OPKG Configuration

Below is a listing of the various configuration files used by opkg. Use opkg.conf for global settings and customfeeds.conf for custom repository entries. The configuration in the other files may be changed but is usually not preserved by sysupgrade.

/etc/opkg.conf

1. dest root /
   
2. dest ram /tmp
   
3. lists_dir ext /var/opkg-lists
   
4. option overlay_root /overlay

复制代码

/etc/opkg/customfeeds.conf

1. # add your custom package feeds here
   
2. #
   
3. # src/gz example_feed_name http://www.example.com/path/to/files

复制代码

/etc/opkg/distfeeds.conf

1. src/gz core https://fw.gl-inet.com/releases/v24.x/24.10.2/mediatek/filogic
   
2. src/gz base https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/base
   
3. src/gz luci https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/luci
   
4. src/gz packages https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/packages
   
5. src/gz routing https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/routing
   
6. src/gz telephony https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/telephony

复制代码

The revised /etc/opkg/distfeeds.conf

1. src/gz core https://fw.gl-inet.com/releases/v24.x/24.10.2/mediatek/filogic
   
2. #src/gz base https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/base
   
3. #src/gz luci https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/luci
   
4. #src/gz packages https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/packages
   
5. #src/gz routing https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/routing
   
6. #src/gz telephony https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/telephony
   
7. src/gz base https://mirrors.vsean.net/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/base
   
8. src/gz luci https://mirrors.vsean.net/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/luci
   
9. src/gz packages https://mirrors.vsean.net/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/packages
   
10. src/gz routing https://mirrors.vsean.net/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/routing
    
11. src/gz telephony https://mirrors.vsean.net/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/telephony

复制代码

References:
[1] GL.iNet Admin Panel v4.8.0-op24 on GL-MT6000

角色

系统重置

因为要安装手动PassWaxx，所以把系统reset。过程跟新机一样，输入两次密码，然后设Wi-Fi SSIDs和passwords，然后SYSTEM里，Advanced Settings，启动Install Now，就把LuCI启动。我们可以进入OpenWrt (GL-TM6000)界面。

角色

GL.iNet OpenWrt (GL-MT6000) opkg configuration

图1：System->Software


图2：Software界面

图3：OPKG Configuration



OPKG Configuration

Below is a listing of the various configuration files used by opkg. Use opkg.conf for global settings and customfeeds.conf for custom repository entries. The configuration in the other files may be changed but is usually not preserved by sysupgrade.

/etc/opkg.conf

1. dest root /
   
2. dest ram /tmp
   
3. lists_dir ext /var/opkg-lists
   
4. option overlay_root /overlay

复制代码

/etc/opkg/customfeeds.conf

1. # add your custom package feeds here
   
2. #
   
3. # src/gz example_feed_name http://www.example.com/path/to/files

复制代码

/etc/opkg/distfeeds.conf

1. src/gz core https://fw.gl-inet.com/releases/v24.x/24.10.2/mediatek/filogic
   
2. src/gz base https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/base
   
3. src/gz luci https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/luci
   
4. src/gz packages https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/packages
   
5. src/gz routing https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/routing
   
6. src/gz telephony https://downloads.openwrt.org/releases/24.10.2/packages/aarch64_cortex-a53/telephony

复制代码

角色

改动/etc/opkg/distfeeds.conf，方便大陆输入基本插件


改用大陆的repository server，我用sjtu。
OpenWrt repository server不用国外，要用大陆的


/etc/opkg/distfeeds.conf

1. src/gz core https://fw.gl-inet.com/releases/v24.x/24.10.2/mediatek/filogic
   
2. src/gz base https://mirror.sjtu.edu.cn/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/base
   
3. src/gz luci https://mirror.sjtu.edu.cn/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/luci
   
4. src/gz packages https://mirror.sjtu.edu.cn/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/packages
   
5. src/gz routing https://mirror.sjtu.edu.cn/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/routing
   
6. src/gz telephony https://mirror.sjtu.edu.cn/openwrt/releases/24.10.2/packages/aarch64_cortex-a53/telephony

复制代码

角色

自己安装PassWaxx （xx-ll）

说到安装，那些库哪呢？

现在我们在Windows下进行，(但是可以在路由器Linux shell做，但是开始时间，路由器没有VPN，所以都是Windows下进行。)，要VPN才能后，把下面才能输入。

Listing 1: github网址 (xx->ll)

1. https://github.com/xiaorouji/openwrt-passwaxx/releases

复制代码

Listing 2: File 1  (xx->ll)

1. https://github.com/xiaorouji/openwrt-passwaxx/releases/download/25.9.3-1/luci-24.10_luci-app-passwaxx_25.9.3-r1_all.ipk

复制代码

Listing 3: File 2 (xx->ll)

1. https://github.com/xiaorouji/openwrt-passwaxx/releases/download/25.9.3-1/luci-24.10_luci-i18n-passwaxx-zh-cn_25.245.60910.793e860_all.ipk

复制代码

Listing 4: File 3 (xx->ll)

1. https://github.com/xiaorouji/openwrt-passwaxx/releases/download/25.9.3-1/passwaxx_packages_ipk_aarch64_cortex-a53.zip

复制代码

用Windows 7-Zip打开“passwaxx_packages_ipk_aarch64_cortex-a53.zip”，解开后把之前两个文件“25.9.3-1/luci-24.10_luci-app-passwaxx_25.9.3-r1_all.ipk”和“luci-24.10_luci-i18n-passwaxx-zh-cn_25.245.60910.793e860_all.ipk”放进去，那么“passwaxx_packages_ipk_aarch64_cortex-a53”就有全部PassWaxx插件文件。

(是不是有点复杂？我最初时候，不懂dl.openwrt.ai和ImmortalWrt插件)

用WinSCP把“passwaxx_packages_ipk_aarch64_cortex-a53”拖进路由器的Linux shell里，就OK。再用PuTTY (IP=192.168.8.1)进去路由器的Linux shell

图1：路由器Linux shell


图2：进入“passwaxx_packages_ipk_aarch64_cortex-a53”


图3：全部PassWaxx的ipk



用下面指令安装

1. opkg install *.ipk --force-reinstall

复制代码

要reboot一次。

图4：PassWaxx