自编译SF1200固件在LuCI界面无法刷新软件列表而opkg update正常

HurryPeng

求助各位大神：
最近买了两台SF1200，想刷一个纯LuCI不带GL.iNet界面的干净固件出来玩，但是自己编译出来的固件没法刷新软件列表。流程基本照着这篇教程走，是用gl-infra-builder编译的，编译配置文件在target_siflower_gl-sf1200生成的基础上把LuCI以及libopenssl、ca-certificates、ca-bundle等https相关的组件勾上了。
进LuCI之后，也把软件源换成了GL.iNet提供的源：

1. src/gz glinet_packages https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/packages
   
2. src/gz glinet_private https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/glinet
   
3. src/gz glinet_kmod https://fw.gl-inet.com/releases/v18.06.5/kmod-3.7/siflower/sf19a28

复制代码

在LuCI中按按钮刷新软件列表，会有下面的错误信息：

1. Downloading https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/packages/Packages.gz
   
2. *** Failed to download the package list from https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/packages/Packages.gz
   
3. 
   
4. Downloading https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/glinet/Packages.gz
   
5. *** Failed to download the package list from https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/glinet/Packages.gz
   
6. 
   
7. Downloading https://fw.gl-inet.com/releases/v18.06.5/kmod-3.7/siflower/sf19a28/Packages.gz
   
8. *** Failed to download the package list from https://fw.gl-inet.com/releases/v18.06.5/kmod-3.7/siflower/sf19a28/Packages.gz
   
9. 
   
10. Collected errors:
    
11. * opkg_download: Failed to download https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/packages/Packages.gz, wget returned 5.
    
12. * opkg_download: Failed to download https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/glinet/Packages.gz, wget returned 5.
    
13. * opkg_download: Failed to download https://fw.gl-inet.com/releases/v18.06.5/kmod-3.7/siflower/sf19a28/Packages.gz, wget returned 5.

复制代码

初步怀疑是与opkg后台用wget下载https内容的证书认证有关的问题，因此也改过几次menuconfig里面与ssl相关的项，但最后还是没能解决这个问题。我的.config配置也发在附件里了。
但最神奇的是，进ssh之后，用opkg update来刷新软件列表，却是一切正常的：

1. root@SF1200:~# opkg update
   
2. Downloading https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/packages/Packages.gz
   
3. Updated list of available packages in /var/opkg-lists/glinet_packages
   
4. Downloading https://fw.gl-inet.com/releases/v18.06.5/packages-3.6/siflower/glinet/Packages.gz
   
5. Updated list of available packages in /var/opkg-lists/glinet_private
   
6. Downloading https://fw.gl-inet.com/releases/v18.06.5/kmod-3.7/siflower/sf19a28/Packages.gz
   
7. Updated list of available packages in /var/opkg-lists/glinet_kmod

复制代码

刷新完之后甚至还能在LuCI界面里看到正常的软件列表。点击下载，会下载失败，类似的报错，而同样在ssh里用opkg install就没有问题。
各位大神能帮忙看一看吗？


PS：上面那个教程里面分享的固件我也试着刷过，可是刷完之后路由器没有任何反应，几个灯轮流闪，闪完过一会看起来像是自动重启了，然后又进入这个循环。ssh也进不去，LuCI也进不去，也不知道为什么。
PPS：另一个分享里面的固件，除了最后一个20220406的版本（带GL.iNet界面）以外的版本，我刷进去之后路由器也没有反映。实在是找不到能用的固件了才尝试自己编译的，又遇到这么奇怪的问题。