设为首页收藏本站
切换到窄版

forum.gl-inet.cn

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
热搜: 活动 交友 discuz
    forum.gl-inet.cn»论坛 › 型号专区 › MT3000,MT2500,MV1000 › MT3000经常性断流
    返回列表 发新帖
    查看: 2691|回复: 1

    [问题反馈] MT3000经常性断流

    [复制链接]
    tefiszx

    2

    主题

    14

    帖子

    148

    积分

    注册会员

    Rank: 2

    积分
    148
    发表于 2023-5-28 10:34:35 | 显示全部楼层 |阅读模式
    这是系统日志
    1. Sun May 28 10:30:44 2023 kern.info kernel: [308270.671587] warp_woctrl_exit_state(), wo_state:6, prev:ENABLE, cur:RESET, req: RESET
    2. Sun May 28 10:30:44 2023 kern.info kernel: [308270.679413] warp_woctrl_send_msg_and_wait_rsp(), idx: 0, state:ENABLE
    3. Sun May 28 10:30:44 2023 kern.info kernel: [308270.687304] warp_woctrl_send_msg_and_wait_rsp(): got wocpu msg response
    4. Sun May 28 10:30:44 2023 kern.info kernel: [308270.696803] [mtk_pending_work] mtk_stop starts !
    5. Sun May 28 10:30:44 2023 kern.info kernel: [308270.701569] mtk_soc_eth 15100000.ethernet eth0: Link is Down
    6. Sun May 28 10:30:44 2023 kern.info kernel: [308270.707448] mtk_soc_eth 15100000.ethernet eth1: Link is Down
    7. Sun May 28 10:30:44 2023 kern.info kernel: [308270.916466] [mtk_pending_work] mtk_stop ends !
    8. Sun May 28 10:30:44 2023 kern.info kernel: [308270.936020] [mtk_pending_work] mtk_hw_init starts !
    9. Sun May 28 10:30:44 2023 kern.info kernel: [308270.940978] [mtk_hw_init] reset_lock:1, force:1
    10. Sun May 28 10:30:44 2023 kern.info kernel: [308270.945591] [mtk_hw_init] execute fe warm reset
    11. Sun May 28 10:30:44 2023 kern.info kernel: [308271.051585] [mtk_eth_warm_reset] reset record val1=0x6000004, val2=0x0, val3=0x0 !
    12. Sun May 28 10:30:44 2023 kern.info kernel: [308271.070241] [mtk_pending_work] mtk_hw_init ends !
    13. Sun May 28 10:30:44 2023 kern.info kernel: [308271.078551] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
    14. Sun May 28 10:30:44 2023 kern.info kernel: [308271.086994] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
    15. Sun May 28 10:30:44 2023 kern.info kernel: [308271.098634] MediaTek MT7981 PHY mdio-bus:00: TX-VCM SW cal result: 0x2
    16. Sun May 28 10:30:44 2023 kern.info kernel: [308271.106107] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:00] driver [MediaTek MT7981 PHY]
    17. Sun May 28 10:30:44 2023 kern.info kernel: [308271.114801] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/gmii link mode
    18. Sun May 28 10:30:44 2023 kern.info kernel: [308271.122505] [nf_hnat_netdevice_event] HNAT driver starts to do warm init !
    19. Sun May 28 10:30:44 2023 kern.info kernel: [308271.153389] mediatek_soc_hnat 15100000.hnat: PPE0 hwnat start
    20. Sun May 28 10:30:44 2023 kern.info kernel: [308271.159220] [mtk_pending_work] HNAT reset done !
    21. Sun May 28 10:30:44 2023 kern.err kernel: [308271.163929] 7981@C02L1,mtk_fe_event() 413: receive fe reset done event, continue SER
    22. Sun May 28 10:30:44 2023 kern.info kernel: [308271.171755] [mtk_pending_work] WiFi SER reset done !
    23. Sun May 28 10:30:44 2023 kern.info kernel: [308271.178979] wdma_dma_ctrl(): WDMA_GLO_CFG=50404e70, txrx = 0
    24. Sun May 28 10:30:44 2023 kern.info kernel: [308271.188460] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e70, txrx = 0
    25. Sun May 28 10:30:44 2023 daemon.notice netifd: Network device 'eth1' link is down
    26. Sun May 28 10:30:44 2023 kern.info kernel: [308271.195435] br-lan: port 1(eth1) entered disabled state
    27. Sun May 28 10:30:44 2023 kern.info kernel: [308271.204235] warp_tx_ring_init_hw(): configure ring 0 setting
    28. Sun May 28 10:30:44 2023 kern.info kernel: [308271.210013] warp_tx_ring_init_hw(): wed:00000000736dc253 wifi:00000000c10378d2: 24420=5c9e8000,24424=2048,24428=0
    29. Sun May 28 10:30:44 2023 kern.info kernel: [308271.220375] warp_tx_ring_init_hw(): configure ring 1 setting
    30. Sun May 28 10:30:44 2023 kern.info kernel: [308271.226143] warp_tx_ring_init_hw(): wed:00000000736dc253 wifi:00000000c10378d2: 24430=5c9f0000,24434=2048,24438=0
    31. Sun May 28 10:30:44 2023 kern.info kernel: [308271.236616] set_rrocfg,0
    32. Sun May 28 10:30:44 2023 kern.info kernel: [308271.262133] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e74, txrx = 3
    33. Sun May 28 10:30:44 2023 kern.err kernel: [308271.268786] 7981@C02L1,mt7981_dump_ser_stat() 6681: ::E  R , SER_HOST_STEP     = 0x00000005
    34. Sun May 28 10:30:44 2023 kern.err kernel: [308271.277229] 7981@C02L1,mt7981_dump_ser_stat() 6683: ::E  R , SER_HOST_STAGE    = 0x00000002
    35. Sun May 28 10:30:44 2023 kern.err kernel: [308271.285659] 7981@C02L1,mt7981_dump_ser_stat() 6685: ::E  R , SER_MCU_TO_HOST   = 0x00000010
    36. Sun May 28 10:30:44 2023 kern.err kernel: [308271.294328] 7981@C02L1,mt7981_dump_ser_stat() 6681: ::E  R , SER_HOST_STEP     = 0x00000005
    37. Sun May 28 10:30:44 2023 kern.err kernel: [308271.302772] 7981@C02L1,mt7981_dump_ser_stat() 6683: ::E  R , SER_HOST_STAGE    = 0x00000004
    38. Sun May 28 10:30:44 2023 kern.err kernel: [308271.311204] 7981@C02L1,mt7981_dump_ser_stat() 6685: ::E  R , SER_MCU_TO_HOST   = 0x00000020
    39. Sun May 28 10:30:47 2023 kern.info kernel: [308274.190511] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 100Mbps/Half - flow control off
    40. Sun May 28 10:30:47 2023 kern.info kernel: [308274.199093] br-lan: port 1(eth1) entered blocking state
    41. Sun May 28 10:30:47 2023 kern.info kernel: [308274.204430] br-lan: port 1(eth1) entered forwarding state
    42. Sun May 28 10:30:47 2023 daemon.notice netifd: Network device 'eth1' link is up
    复制代码



    这是ping的输出。❯ ping 192.168.8.1| awk '{ print strftime("%Y.%m.%d %H:%M:%S",systime())"\t" $0; fflush() }'
    2023.05.28 10:30:28     PING 192.168.8.1 (192.168.8.1) 56(84) 字节的数据。
    2023.05.28 10:30:28     64 字节，来自 192.168.8.1: icmp_seq=1 ttl=64 时间=0.546 毫秒
    2023.05.28 10:30:29     64 字节，来自 192.168.8.1: icmp_seq=2 ttl=64 时间=0.535 毫秒
    2023.05.28 10:30:30     64 字节，来自 192.168.8.1: icmp_seq=3 ttl=64 时间=0.634 毫秒
    2023.05.28 10:30:31     64 字节，来自 192.168.8.1: icmp_seq=4 ttl=64 时间=0.591 毫秒
    2023.05.28 10:30:32     64 字节，来自 192.168.8.1: icmp_seq=5 ttl=64 时间=0.676 毫秒
    2023.05.28 10:30:33     64 字节，来自 192.168.8.1: icmp_seq=6 ttl=64 时间=0.681 毫秒
    2023.05.28 10:30:35     64 字节，来自 192.168.8.1: icmp_seq=7 ttl=64 时间=0.574 毫秒
    2023.05.28 10:30:36     64 字节，来自 192.168.8.1: icmp_seq=8 ttl=64 时间=0.609 毫秒
    2023.05.28 10:30:37     64 字节，来自 192.168.8.1: icmp_seq=9 ttl=64 时间=0.545 毫秒
    2023.05.28 10:30:47     来自 192.168.8.51 icmp_seq=16 目标主机不可达
    2023.05.28 10:30:47     来自 192.168.8.51 icmp_seq=17 目标主机不可达
    2023.05.28 10:30:47     来自 192.168.8.51 icmp_seq=18 目标主机不可达
    2023.05.28 10:30:47     来自 192.168.8.51 icmp_seq=19 目标主机不可达
    2023.05.28 10:30:48     64 字节，来自 192.168.8.1: icmp_seq=20 ttl=64 时间=15.4 毫秒
    2023.05.28 10:30:49     64 字节，来自 192.168.8.1: icmp_seq=21 ttl=64 时间=0.511 毫秒
    2023.05.28 10:30:50     64 字节，来自 192.168.8.1: icmp_seq=22 ttl=64 时间=0.485 毫秒
    2023.05.28 10:30:51     64 字节，来自 192.168.8.1: icmp_seq=23 ttl=64 时间=0.556 毫秒
    2023.05.28 10:30:52     64 字节，来自 192.168.8.1: icmp_seq=24 ttl=64 时间=0.583 毫秒
    2023.05.28 10:30:53     64 字节，来自 192.168.8.1: icmp_seq=25 ttl=64 时间=0.567 毫秒
    2023.05.28 10:30:54     64 字节，来自 192.168.8.1: icmp_seq=26 ttl=64 时间=0.783 毫秒
    2023.05.28 10:30:55     64 字节，来自 192.168.8.1: icmp_seq=27 ttl=64 时间=0.771 毫秒



    可以发现在ping断流的时候，就是网卡shutdown的时候。

    glinet 天猫旗舰店领取国补，至高立减15%，全年至低价，可叠加多重优惠，详情咨询店铺客服！
    回复

    使用道具 举报

    萝卜大侠

    76

    主题

    2144

    帖子

    9846

    积分

    管理员

    Rank: 9Rank: 9Rank: 9

    积分
    9846

    官方人员
    发表于 2023-5-29 09:49:31 | 显示全部楼层
    完整日志导出看一下呢
    glinet 天猫旗舰店领取国补，至高立减15%，全年至低价，可叠加多重优惠，详情咨询店铺客服！
    回复

    使用道具 举报

    返回列表 发新帖
    高级模式
    B Color Image Link Quote Code Smilies
    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

    Archiver|手机版|小黑屋|gl-inet.cn ( 粤ICP备18130956号 )

    GMT+8, 2024-11-22 17:39 , Processed in 0.022098 second(s), 25 queries .

    Powered by Discuz! X3.4

    Copyright © 2001-2021, Tencent Cloud.

    快速回复 返回顶部 返回列表