guoguo 发表于 2024-11-3 22:15:07

mt6000简单构建属于自己的固件

本帖最后由 guoguo 于 2024-11-3 22:16 编辑

前言：为小白提供一些简单构建心仪固件的方法，如果哪里讲的不对也请路过大佬及时指正，果果在此先谢过了。
注意：包名之间要用空格隔开，需要构建的项直接替换掉中文指引，需要设置拨号的朋友，设置好以后去掉前面的#号让配置生效。
openwrt构建地址         
构建插件包名：luci-i18n-base-zh-cn luci-i18n-firewall-zh-cn luci-i18n-opkg-zh-cn
immortalwrt构建地址   
构建插件包名：
luci-app-argon-config luci-theme-argonluci-i18n-argon-config-zh-cn luci-i18n-base-zh-cn luci-i18n-firewall-zh-cn luci-i18n-opkg-zh-cn luci-proto-wireguard luci-app-attendedsysupgrade attendedsysupgrade-common luci-i18n-attendedsysupgrade-zh-cn dockerd luci-app-dockerman luci-i18n-dockerman-zh-cn
构建脚本：
# Beware! This script will be in /rom/etc/uci-defaults/ as part of the image.
# Uncomment lines to apply:
# 设置后台登录ip与密码
root_password="设置登录密码"
lan_ip_address="设置后台登录ip"

# 设置时区与固件名
uci set system.@system.hostname='设置固件名'
uci set system.@system.zonename='Asia/Shanghai'
uci set system.@system.timezone='CST-8'

uci commit
# 设置拨号
# pppoe_username="设置宽带账号"
# pppoe_password="设置宽带密码"

# log potential errors
exec >/tmp/setup.log 2>&1

if [ -n "$root_password" ]; then
(echo "$root_password"; sleep 1; echo "$root_password") | passwd > /dev/null
fi

# Configure LAN
# More options: https://openwrt.org/docs/guide-user/base-system/basic-networking
if [ -n "$lan_ip_address" ]; then
uci set network.lan.ipaddr="$lan_ip_address"
uci commit network
fi

# Configure WLAN
# More options: https://openwrt.org/docs/guide-u ... ic#wi-fi_interfaces
if [ -n "$wlan_name" -a -n "$wlan_password" -a ${#wlan_password} -ge 8 ]; then
uci set wireless.@wifi-device.disabled='0'
uci set wireless.@wifi-iface.disabled='0'
uci set wireless.@wifi-iface.encryption='psk2'
uci set wireless.@wifi-iface.ssid="$wlan_name"
uci set wireless.@wifi-iface.key="$wlan_password"
uci commit wireless
fi

# Configure PPPoE
# More options: https://openwrt.org/docs/guide-u ... e_ppp_over_ethernet
if [ -n "$pppoe_username" -a "$pppoe_password" ]; then
uci set network.wan.proto=pppoe
uci set network.wan.username="$pppoe_username"
uci set network.wan.password="$pppoe_password"
uci commit network
fi

echo "All done!"




dubu 发表于 2024-11-3 23:14:22


谢谢高手分享技巧

badmen 发表于 2024-11-4 08:27:44

谢谢高手分享技巧

guoguo 发表于 2024-11-13 10:06:05

dubu 发表于 2024-11-3 23:14
谢谢高手分享技巧

分享快乐，快乐分享。

guoguo 发表于 2024-11-13 10:06:33

badmen 发表于 2024-11-4 08:27
谢谢高手分享技巧

分享快乐，快乐分享。
页: [1]
查看完整版本: mt6000简单构建属于自己的固件