定制版的AR300M U-boot无法刷入固件
企业定制版的AR300M，192.168.1.1访问到U-boot，但是无法刷入固件，不知道是什么问题？刷入官网固件openwrt-ar300m-4.3.7-0913-1694589403，提示文件太大了。
Request for----: /
we are here 1
open file: /index.html--finished reading file---
Request for----: /style.css
we are here 2
open file: /style.css--finished reading file---
Data will be downloaded at 0x80800000 in RAM
Upgrade type: firmware
Upload file size: 17828154 bytes
## Error: file too big!
Loading: #######################################
#######################################
#######################################
####Data will be downloaded at 0x80800000 in RAM
Upgrade type: firmware
Upload file size: 17828154 bytes
## Error: file too big!
Loading: #######################################
#######################################
#################################
而刷入其他openwrt文件，openwrt-ar71xx-generic-gl-ar300m-squashfs-sysupgrade.bin，程序跑到这里就没反应了，重启后还是没有刷入进来。
Request for----: /
we are here 1
open file: /index.html--finished reading file---
Request for----: /style.css
we are here 2
open file: /style.css--finished reading file---
Data will be downloaded at 0x80800000 in RAM
Upgrade type: firmware
Upload file size: 6750212 bytes
Loading: #######################################
#######################################
##############################Data will be downloaded at 0x80800000 in RAM
Upgrade type: firmware
Upload file size: 6750212 bytes
Loading: #######################################
#######################################
#######################################
###############
重启后显示的程序信息如下：
U-Boot 1.1.4-g9abb38de (Aug 25 2016 - 08:51:31)
DRAM:128 MB
Nor Flash:16 MB, sector count = 256
ath_spi_nand_ecc: Couldn't enable internal ECC
Protect off 9F040000 ... 9F04FFFF
Un-Protecting sectors 4..4 in bank 1
Un-Protected 1 sectors
Erasing Flash...Erasing flash...
First 0x4 last 0x4 sector size 0x10000
4
Erased 1 sectors
Writing to Flash... write addr: 9f040000
done
Protecting sectors 4..4 in bank 1
Protected 1 sectors
Hit any key to stop autoboot:1 0
Device calibrated. Booting ...
no devices available
## Booting image at 9f050000 ...
Image Name: MIPS LEDE Linux-4.4.50
Created: 2017-02-2017:13:44 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1310643 Bytes =1.2 MB
Load Address: 80060000
Entry Point:80060000
Verifying Checksum at 0x9f050040 ...OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 134217728
Starting kernel ...
没有nand刷这个固件
https://dl.gl-inet.cn/?model=ar300m16 hansome 发表于 2023-11-9 16:42
没有nand刷这个固件
https://dl.gl-inet.cn/?model=ar300m16
这个GL-AR300M16 Shadow 固件也刷了，换了几个版本也没有刷进去，刷机过程灯也没有闪。
有没有编程器固件，我找个编程器来刷进去好了。
ARP Retry count exceeded; starting again
Trying eth0
eth0 link down
FAIL
Trying eth1
Request for----: /
we are here 1
open file: /index.html--finished reading file---
Request for----: /style.css
we are here 2
open file: /style.css--finished reading file---
Request for----: /favicon.ico
we are here 2
open file: /favicon.ico## Error: file not found!
open file: /404.html--finished reading file---
Data will be downloaded at 0x80800000 in RAM
Upgrade type: firmware
Upload file size: 15468873 bytes
Loading: #######################################
#######################################
################################## Error: couldn't find start of data in next packet!
Data will be downloaded at 0x80800000 in RAM
Upgrade type: firmware
Upload file size: 15468873 bytes
Loading: #######################################
#######################################
#######################################
#######
页:
[1]