这支持原厂的usb modem，热点，蜂窝，中继等联网方式？
luka 发表于 2022-8-20 19:33
老哥怎么才能加入docker支持呀
我得试一下，这个型号存储不是很充足
https://github.com/gl-inet/gl-infra-builder/issues/37
Cannot compile anymore
老哥怎么才能加入docker支持呀
找时间试试，要加入自定义软件
我试过了 不适用其它型号
7918 发表于 2022-7-15 19:43
按照教程编译4x的固件，，几天前已经编译过，今天看有升级，就从头开始操作了一遍，保证和成功那次一样的配 ...
贴下具体错误呢
萝卜大侠 发表于 2022-7-15 09:35
将你前面执行的命令贴一下，这种情况肯定是前面就报错了，你没注意到
在运行 ./scripts/gen_config.py target_wlan_ap-gl-axt1800-5-4 glinet_depends 时候就报错了
RNING: Makefile 'package/utils/policycoreutils/Makefile' has a build dependency on 'libpam', which does not exist
WARNING: Makefile 'package/feeds/ipq807x/qca-ssdk/Makefile' has a dependency on 'kmod-qca-rfs', which does not exist
WARNING: Makefile 'package/system/uvol/Makefile' has a dependency on 'lvm2', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/busybox/Makefile' has a build dependency on 'libpam', which does not exist
WARNING: Makefile 'package/boot/kexec-tools/Makefile' has a dependency on 'liblzma', which does not exist
WARNING: Makefile 'package/network/services/lldpd/Makefile' has a dependency on 'libnetsnmp', which does not exist
WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a build dependency on 'libpam', which does not exist
WARNING: Makefile 'package/feeds/ipq807x/qca-ssdk/Makefile' has a dependency on 'kmod-qca-rfs', which does not exist
WARNING: Makefile 'package/system/uvol/Makefile' has a dependency on 'lvm2', which does not exist
onfiguration written to .config
Running make defconfig
Collecting package info: done
Collecting target info: done
WARNING: Makefile 'package/feeds/luci/luci-app-rosy-file-server/Makefile' has a dependency on 'rosy-file-server', which does not exist
WARNING: Makefile 'package/feeds/ipq807x/qca-ssdk/Makefile' has a dependency on 'kmod-qca-rfs', which does not exist
WARNING: Makefile 'package/system/uvol/Makefile' has a dependency on 'lvm2', which does not exist
#
# configuration written to .config
sonnycui 发表于 2022-7-15 07:01
5.4 内核，AXT1800,到 make就报错了。
WARNING: Makefile 'package/feeds/luci/luci-app-rosy-file-server ...
将你前面执行的命令贴一下，这种情况肯定是前面就报错了，你没注意到
5.4 内核，AXT1800,到 make就报错了。
WARNING: Makefile 'package/feeds/luci/luci-app-rosy-file-server/Makefile' has a dependency on 'rosy-file-server', which does not exist
WARNING: Makefile 'package/feeds/ipq807x/qca-ssdk/Makefile' has a dependency on 'kmod-qca-rfs', which does not exist
WARNING: Makefile 'package/system/uvol/Makefile' has a dependency on 'lvm2', which does not exist
#
# configuration written to .config
#
#########################
#########################
#########################
#########################
#########################
#########################
root@sggc2:~/lede/gl-infra-builder/wlan-ap/openwrt# make mennuconfig
WARNING: Makefile 'package/feeds/luci/luci-app-rosy-file-server/Makefile' has a dependency on 'rosy-file-server', which does not exist
WARNING: Makefile 'package/feeds/ipq807x/qca-ssdk/Makefile' has a dependency on 'kmod-qca-rfs', which does not exist
WARNING: Makefile 'package/system/uvol/Makefile' has a dependency on 'lvm2', which does not exist
time: target/linux/prereq#0.06#0.01#0.08
make mennuconfig
make -r mennuconfig: build failed. Please re-run make with -j1 V=s or V=sc for a higher verbosity level to see what's going on
make: *** Error 1
root@sggc2:~/lede/gl-infra-builder/wlan-ap/openwrt#
ocake 发表于 2022-7-10 11:28
感谢大大无私分享，使用原汁原味没添加减少的方法，成功编译AXT1800 5.4固件，过程出现下列依赖软件错误 ...
警告可以忽略
ocake 发表于 2022-7-10 11:28
感谢大大无私分享，使用原汁原味没添加减少的方法，成功编译AXT1800 5.4固件，过程出现下列依赖软件错误 ...
无法uboot升级的问题已经解决了
ocake 发表于 2022-7-10 11:28
感谢大大无私分享，使用原汁原味没添加减少的方法，成功编译AXT1800 5.4固件，过程出现下列依赖软件错误 ...
是的 AXT，5.4 我也遇到这个问题
支持支持！{:2_37:}
支持支持！
7918 发表于 2022-7-10 16:27
多谢多谢，搞死我了，，，，，添加app和协议这些是自动添加的吗 ，，只添加这些不用再修改别的了吧，， ...
生成配置完先看下有没有依赖缺失等等的问题，解决后编译过程中出问题了需要进行一些调整
m0eak 发表于 2022-7-10 14:16
profile里有个axt1800，你复制一个取个自己的名字，我是直接在原始上面加的
生成配置的时候就
多谢多谢，搞死我了，，，，，添加app和协议这些是自动添加的吗 ，，只添加这些不用再修改别的了吧，，
本帖最后由 m0eak 于 2022-7-10 14:20 编辑
7918 发表于 2022-7-10 13:27
大佬，具体怎么加的其他插件，具体加在哪，，
profile里有个axt1800，你复制一个取个自己的名字，我是直接在原始上面加的
生成配置的时候就
./scripts/gen_config.py target_wlan_ap-gl-axt1800 glinet_depends glinet_axt1800
m0eak 发表于 2022-7-10 12:22
终于编译出来了，先测试一下看看有没有问题
大佬，具体怎么加的其他插件，具体加在哪，，
本帖最后由 m0eak 于 2022-7-10 13:19 编辑
终于编译出来了，先测试一下看看有没有问题
目前为止一切正常，文件存储能用，中继功能正常，就是不知道编译完为什么有70多mb