萝卜大侠 发表于 2022-7-15 12:31:05

Misaka 发表于 2022-7-15 10:57
大佬能帮我看看是哪里有问题吗

没看到具体错误,大概率是你依赖环境的问题,检查前面步骤的依赖包是否正确安装

Misaka 发表于 2022-7-15 17:15:11

~/桌面$ sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig unzip time rsync python3 python3-setuptools python3-yaml
misaka 的密码:
正在读取软件包列表... 完成
正在分析软件包的依赖关系树... 完成
正在读取状态信息... 完成               
build-essential 已经是最新版 (12.9ubuntu3)。
gawk 已经是最新版 (1:5.1.0-1build3)。
gettext 已经是最新版 (0.21-4ubuntu4)。
libncurses5-dev 已经是最新版 (6.3-2)。
python3 已经是最新版 (3.10.4-0ubuntu2)。
python3-setuptools 已经是最新版 (59.6.0-1.2)。
python3-yaml 已经是最新版 (5.4.1-1ubuntu1)。
rsync 已经是最新版 (3.2.3-8ubuntu3)。
time 已经是最新版 (1.9-0.1build2)。
unzip 已经是最新版 (6.0-26ubuntu3)。
zlib1g-dev 已经是最新版 (1:1.2.11.dfsg-2ubuntu9)。
swig 已经是最新版 (4.0.2-1ubuntu1)。
git 已经是最新版 (1:2.34.1-1ubuntu1.4)。
libssl-dev 已经是最新版 (3.0.2-0ubuntu1.6)。
下列软件包是自动安装的并且现在不需要了:
chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi
libgstreamer-plugins-bad1.0-0 libva-wayland2
使用'sudo apt autoremove'来卸载它(它们)。
升级了 0 个软件包,新安装了 0 个软件包,要卸载 0 个软件包,有 3 个软件包未被升级。
全新的ubuntu22.04LTS,git的名称和邮箱以及SSH key这些都设置了,还有其他需要的依赖吗

萝卜大侠 发表于 2022-7-16 22:18:18

Misaka 发表于 2022-7-15 17:15
~/桌面$ sudo apt install build-essential libncurses5-dev gawk git libssl-dev gettext zlib1g-dev swig ...

没有了,下一步操作的输出也贴一下

不望月的狼人 发表于 2022-7-17 10:10:54

本帖最后由 不望月的狼人 于 2022-7-17 14:05 编辑

5.4内核编译axt1800报错,麻烦大侠得空看下!@萝卜大侠Configuring wireless-regdb.
Configuring urngd.
Configuring luci-i18n-firewall-zh-cn.
Configuring rpcd-mod-rrdns.
Configuring ppp-mod-pppoe.
Configuring gl-sdk4-led.
Collected errors:
* pkg_hash_check_unresolved: cannot find dependency libblobmsg-json20220515 for gl-sdk4-utils
* pkg_hash_fetch_best_installation_candidate: Packages for gl-sdk4-utils found, but incompatible with the architectures configured
* satisfy_dependencies_for: Cannot satisfy the following dependencies for gl-sdk4-cable:
*      libblobmsg-json20220515
* opkg_install_cmd: Cannot install package gl-sdk4-cable.
* pkg_hash_check_unresolved: cannot find dependency libnl-tiny2022-05-17 for gl-sdk4-carrier-monitor
* pkg_hash_fetch_best_installation_candidate: Packages for gl-sdk4-carrier-monitor found, but incompatible with the architectures configured
* opkg_install_cmd: Cannot install package gl-sdk4-carrier-monitor.
* pkg_hash_check_unresolved: cannot find dependency libnl-tiny2022-05-17 for gl-sdk4-wifi
* pkg_hash_fetch_best_installation_candidate: Packages for gl-sdk4-wifi found, but incompatible with the architectures configured
* satisfy_dependencies_for: Cannot satisfy the following dependencies for gl-sdk4-netmode:
*      libnl-tiny2022-05-17
* opkg_install_cmd: Cannot install package gl-sdk4-netmode.
make: *** Error 255
make: Leaving directory '/home/shi/gl-infra-builder/wlan-ap/openwrt'
make: *** Error 2
make: Leaving directory '/home/shi/gl-infra-builder/wlan-ap/openwrt'
make: *** Error 2

萝卜大侠 发表于 2022-7-18 14:10:36

不望月的狼人 发表于 2022-7-17 10:10
5.4内核编译axt1800报错,麻烦大侠得空看下!@萝卜大侠

已修复

moyu 发表于 2022-8-13 21:44:27

AXT1800 的 OpenWrt Configuration 怎么配置

萝卜大侠 发表于 2022-8-17 22:58:53

moyu 发表于 2022-8-13 21:44
AXT1800 的 OpenWrt Configuration 怎么配置

没明白,你告诉我你具体想做啥?

neo 发表于 2022-8-20 10:32:38

安装纯开源固件后要怎么才能支持usb硬盘和wiregard?

gdzhujun 发表于 2022-8-25 20:59:32

gdzhujun@gdzhujun:~/gl-infra-builder$ python3 setup.py
Missing config-19.x.yml

不管执行哪个配置都是这个提示,换了几台机器也一样

zss0hs 发表于 2022-9-20 19:57:11

编译到最后,多次出现了以下输出:

No APK packages found
/home/ljg/openwrt/gl-infra-builder/wlan-ap/openwrt/scripts/apk-make-index.sh: line 18: apk: command not found
No APK packages found
/home/ljg/openwrt/gl-infra-builder/wlan-ap/openwrt/scripts/apk-make-index.sh: line 18: apk: command not found
/home/ljg/openwrt/gl-infra-builder/wlan-ap/openwrt/scripts/apk-make-index.sh: line 18: apk: command not found

有人遇到吗?这个是不是可以忽略掉?

H3MKL 发表于 2022-10-20 18:14:34

感谢分享。

freed0m 发表于 2022-11-2 11:20:03

感谢楼主分享

WittyHare 发表于 2022-11-7 16:52:56

请问楼主,那个热点共享功能如何在自定义固件中保留下来,那个功能对我很有用。

smilekevin 发表于 2022-11-22 18:39:37

感谢分享~~~~~~~~

smilekevin 发表于 2022-11-22 18:40:55

感谢分享~~~~~~~~

imdreamrunner 发表于 2022-12-12 15:06:13

感谢大佬分享。我成功在一个干净的 Ubuntu 20.04 编译出来了!不需要改任何设置和步骤。

编译过程中看到一些错误,但不影响最后的编译。
其中一个是这个 apk-make-index.sh 脚本在试图创建 apk 的打包;但普通的 OpenWRT 都是用 IPK 的包,不清楚是哪个厂家的固件的包是 APK 格式的。

https://github.com/Telecominfraproject/wlan-ap/blob/dd995426a59d722a97b3552c4606a9d35deed4b1/patches/backports/0021-build-create-APK-files-parrallel-to-IPK.patch#L146

cfxy2010 发表于 2022-12-13 02:39:26

ksd886 发表于 2022-6-18 17:57
已成功编译所需插件

有没有科学上网的插件呢?小白一个,弄了快一个星期了也没整出来,方便分享一下吗?万分感谢啦:handshake

nihaolai 发表于 2023-1-14 01:29:05

好好好好好好好好好好好好好好好好好顶

weishao5678 发表于 2023-1-18 18:58:01

大神空吗 纯小白 帮帮我

萝卜大侠 发表于 2023-1-19 09:28:06

weishao5678 发表于 2023-1-18 18:58
大神空吗 纯小白 帮帮我

不会手把手教,有什么问题直接贴出来
页: 1 2 [3] 4
查看完整版本: AXT1800开源固件编译步骤